Announcement

Collapse
No announcement yet.
[vb_side_1]

Latest Forum Posts

Collapse

Trending Forum Posts

Collapse

[vb_side_2]
[vb_main_1]

Printing on fabric

Collapse
X
 
  • Time
  • Show
Clear All
new posts

    Printing on fabric

    Help I have been quilting for years, however want to try something new. Printing on fabric, I know how but need to know how to set it so it will not fade. Any ideas or tried and true means.

    #2
    Just get Bubble Jet 2000 and follow the instructions on the back
    Betty

    Comment


      #3
      Use Bubble Jet Set or buy the specially prepared fabrics. They now come in cotton lawn, silk, and organza, in addition to the regular cotton.

      in Vancouver, Canada

      Comment


        #4
        I use Printed Treasures. It has the best results.

        in Vancouver, Canada

        Comment


          #5
          Hi, I have used the specially treated and my own prepared fabrics (I just iron it onto freezer paper), and set the saturation level on the ink up about 25 percent. Then I let it dry for 15 minutes, remove the backing, if any, and heat set it with my iron. After that, I rinse it in water, drip dry it and iron it again. I have not had it fade and the colors are usually great. Hope this helps.

          "Neglect not the gift that is within you..." -1 Timothy 4:14

          Comment


            #6
            I do like Sewdreamy and treat fabrics myself and iron it onto freezer paper. I was in a hurry this past weekend and didn't have anything made up (the directions say it's better to make it when you need it). Anyway I bought some printed treasures and the colors did not come out as deep and rich.

            Comment


              #7
              If you have a Hewlett Packard printer, you should go to the cjenkins website at http://www.cjenkinscompany.com and order Hewlett Packard Bubble Jet Set 2000.

              It is specially formulated for HP printers and the type of inks they use.

              BethMI

              Comment


                #8
                Another thing to investigate is what type of inks your printer uses.
                If it is dye based then you will need the mordant of Bubble jet, but if it is pigment based then it just needs ironing. Epsom Durabrite inks are pigment based. You also get a better result if your printer has a 'L' shaped paper feed, than if your printer has a 'U'shaped paper feed.

                I know this because I have a friend who teaches this subject and is writing a book about it, and I have made some samples up for her to include.

                Rosemary

                P.S. I bought my first printer, an epsom, on her advice earlier this year and am very pleased with it.

                Comment


                  #9
                  Just a little warning: "prepared fabrics" usually means that they are prepared to take dyes more easily. But you would still have to 'set' the colours, according to the type of dye used (check with manufacturer if in doubt). Very often a hot and dry iron will set colour and make it permanent.

                  Lorchen
                  From the edge of Sherwood Forest, home of Robin Hood

                  Comment


                    #10
                    I came across a rumor today from a Yahoo forum posting, that something in Bubble Jet is carcinogenic. Has anyone got a source for that rumor? I made a photoquilt for a good friend struggling with cancer and I have been surfing the internet today to find something to verify this rumor.

                    Comment


                      #11
                      I'll bet it is carcinogenic if you DRINK it, but not if you apply it to the fabric then wash it out afterward as directed.

                      And I'll bet other brands of pre-printed sheets are carcinogenic if you eat them.

                      Life is fatal.

                      BethMI

                      Comment


                        #12
                        "Life is fatal." Funny!

                        Comment


                          #13
                          Before a rumor like this runs amok on the internet, I thought I should inquire of the company that makes this product.

                          I emailed the manufacturer, the C.Jenkins Company, about the possible carcinogenic properties of Bubble Jet Set, and this is what the inventor of the product said about this topic:

                          "Hello

                          My name is Jerome Jenkins and I am the inventor of the Bubble Jet Set 2000 solution. I would highly appreciate it if you could post this information onto the site where the rumor exist.

                          The only chemical in the Bubble Jet Set 2000 that is even mentioned in the same sentence with cancer is formaldehyde. However, the parts per volume is .001% which it all cases 3%-6% is allowed. Which you can easily see that we are well below the maximum numbers. However, there was a study taken about 8 years ago on the facts & the effects of the chemical. I will let you read it word for word and you will see how the rumor is simply a rumor. Also, all our customers have access to our MSDS sheets where they can research the chemicals in the Bubble Jet set just to learn how we make the product. Also, the ink is much more hazardous in your printer than the Bubble Jet Set 2000. Just as any household product under your cabinet.

                          I would love to answer all questions as this is a subject we would love to dismiss."

                          He then attached the information on formaldehyde, which is highly technical and which I will copy and insert into my next forum posting.

                          I would wager that innumerable household products contain these very low levels of formaldehyde. If we can accept them in those products, why not in Bubble Jet Set?

                          I think that we should all remember that even the commercially printed fabrics we purchase had chemicals applied to them to "prepare them for dying," which we later wash out eventually.

                          BethMI

                          Comment


                            #14
                            Continuation of my earlier post about the relative safety of Bubble Jet Set...

                            Mr. Jenkins' point was that the only "carcinogen" in Bubble Jet Set is formaldehyde and that formaldehyde is already present everywhere, anyway.

                            He referred me to information about formaldehyde which was drawn from the ATSDR (Agency for Toxic Substances and Disease Registry). That is the congressionally mandated agency to perform specific functions concerning the effect on public health of hazardous substances in the environment. That agency’s information on formaldehyde is available at
                            http://www.atsdr.cdc.gov/toxprofiles/phs111.html

                            That information basically says that our own bodies produce some formaldehyde and that we are exposed to it daily via many routes. It is in many home products and you may breathe in formaldehyde while using these products. Latex paint, fingernail hardener, and fingernail polish release a large amount of formaldehyde to the air. Plywood and particle board, as well as furniture and cabinets made from them, fiberglass products, new carpets, decorative laminates, and some permanent press fabrics give off a moderate amount of formaldehyde. Some paper products, such as grocery bags and paper towels, give off small amounts of formaldehyde. Because these products contain formaldehyde, you may also be exposed on the skin by touching or coming in direct contact with them. You may also be exposed to small amounts of formaldehyde in the food you eat. You are not likely to be exposed to formaldehyde in the water you drink because it does not last a long time in water.

                            Many other home products contain and give off formaldehyde although the amount has not been carefully measured. These products include household cleaners, carpet cleaners, disinfectants, cosmetics, medicines, fabric softeners, glues, lacquers, and antiseptics. You may also breathe formaldehyde if you use unvented gas or kerosene heaters indoors or if you or someone else smokes a cigar, cigarette, or pipe indoors.

                            You are exposed to small amounts of formaldehyde in the air. It occurs from both natural and man made sources although combustion is the largest source. If you live in an unpopulated area, you may be exposed to about 0.2 parts per billion (ppb) of formaldehyde in the air outdoors. In suburban areas, you may be exposed to about 2–6 ppb of formaldehyde. If you live in a heavily populated area or near some industries, you may be exposed to 10–20 ppb. You may also be exposed to higher levels of formaldehyde during rush hour commutes in highly populated areas because it is formed in automobile and truck exhaust.

                            So, quilters ... if you have paint on your walls or carpet, furniture, cabinets, fabric softener, fingernail polish, grocery bags, etc. in your home or if you drive a vehicle or if you use cosmetics or are EVER around smokers, you are already “exposed” to formaldehyde.

                            Personally, I’ll take my chances with Bubble Jet Set rather than jettison all of these products from my home and forego riding on the highway!

                            I think that we can forget about the supposed "dangers" of using this product!

                            BethMI

                            Comment


                              #15
                              Thank you Beth for going straight to the source. I love the product and It is good to know that I am not putting myself at any more risk than regular everyday life. An un founded rumor can spread like wild fire. Thanks again for putting out the fire. Betty Ann

                              Comment

                              What's Going On

                              Collapse

                              There are currently 334 users online. 0 members and 334 guests.

                              Most users ever online was 442 at 07:43 AM on 11-15-2024.

                              Forum Stats

                              Collapse

                              Topics: 7,646   Posts: 144,737   Members: 16,641   Active Members: 5
                              Welcome to our newest member, Lev Anderson-LevTest1.

                              Latest Topics

                              Collapse

                              There are no results that meet this criteria.

                              Trending

                              Collapse

                              There are no results that meet this criteria.

                              Working...
                              X