Announcement
Collapse
No announcement yet.
[vb_side_1]
Latest Forum Posts
Collapse
-
by gjordanI’m trying to learn how to load photos. ...
-
Channel: BOM 2021 - Color My World
03-25-2021, 09:17 PM -
-
I am late to the party so I have only completed the 8 Small House 1 units so far. I realize this post is too late for everyone...
-
Channel: BOM 2021 - Color My World
03-24-2021, 11:30 AM -
-
by HelenWMost Color My World quilters probably think of you as the trouble shooter for all thing Color My World.
They may not...-
Channel: BOM 2021 - Color My World
03-23-2021, 06:47 AM -
-
I moved the first of the year but I had ordered the fabric kit. Now when I opened it i didnt find any directions or the...
-
Channel: BOM 2021 - Color My World
03-22-2021, 12:38 PM -
-
by midnight33I’m jumping ahead a bit....made brown fusible bias for tree trunks & now experimenting with dif shapes & fabrics...1 Photo
-
Channel: BOM 2021 - Color My World
03-21-2021, 05:37 PM -
-
by nhbasketsThought I’d start a thread where those of us using wool can post on progress when using this alternative medium for this...2 Photos
-
Channel: BOM 2021 - Color My World
03-19-2021, 04:31 PM -
-
Because I am using a dark background I plan to make lighter coloured trees. I know that the 14 yards of bias tape required...
-
Channel: BOM 2021 - Color My World
03-17-2021, 07:39 PM -
-
I can't find anything that mentions about what kind/size needle that is recommended if sewing with 60 wt thread on top and...
-
Channel: BOM 2021 - Color My World
03-14-2021, 08:04 PM -
Trending Forum Posts
Collapse
-
by gjordanI’m trying to learn how to load photos. ...
-
Channel: BOM 2021 - Color My World
03-25-2021, 09:17 PM -
-
I am late to the party so I have only completed the 8 Small House 1 units so far. I realize this post is too late for everyone...
-
Channel: BOM 2021 - Color My World
03-24-2021, 11:30 AM -
-
by HelenWMost Color My World quilters probably think of you as the trouble shooter for all thing Color My World.
They may not...-
Channel: BOM 2021 - Color My World
03-23-2021, 06:47 AM -
-
I moved the first of the year but I had ordered the fabric kit. Now when I opened it i didnt find any directions or the...
-
Channel: BOM 2021 - Color My World
03-22-2021, 12:38 PM -
-
by midnight33I’m jumping ahead a bit....made brown fusible bias for tree trunks & now experimenting with dif shapes & fabrics...1 Photo
-
Channel: BOM 2021 - Color My World
03-21-2021, 05:37 PM -
-
by nhbasketsThought I’d start a thread where those of us using wool can post on progress when using this alternative medium for this...2 Photos
-
Channel: BOM 2021 - Color My World
03-19-2021, 04:31 PM -
-
Because I am using a dark background I plan to make lighter coloured trees. I know that the 14 yards of bias tape required...
-
Channel: BOM 2021 - Color My World
03-17-2021, 07:39 PM -
-
I can't find anything that mentions about what kind/size needle that is recommended if sewing with 60 wt thread on top and...
-
Channel: BOM 2021 - Color My World
03-14-2021, 08:04 PM -
[vb_side_2]
[vb_main_1]
Viking bobbin winding
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Viking bobbin winding
I took my machine in for servicing this past week since the bobbin winder was 1) no longer winding evenly and 2) was winding too full. I also had a problem when a bobbin was too full, I had to sew with the bobbin cover off so I wouldn't get rats nest.
I found out that there is no adjustment for the bobbin winding evenly - I just have to watch it and move the thread up and down with my finger as it winds.
I also found out how to adjust the full-ness of the bobbin.
My big issue was with the 'too full' bobbin. Apparently the plastic bobbins used by Viking warp when the bobbin is filled too tightly or too full. Who knew!
I was told that when I wind my bobbin, I need to 1) use the footpedal on the lowest speed rather than the start/stop switch and 2) not wind the bobbin using the thread through the needle since that mucks up with the bobbin tension. This last bit really ticked me off. This is one of the bonuses I liked when I was looking at purchasing the machine... its DESIGNED to be wound that way... and now they're telling me I shouldn't *use* it that way?!?!
Frustrating!!Tags: None
- IP
-
thanks for the "heads up" about this issue--my daughter has a Husqvarna Viking machine and I'll tell her about this. There's not much else that makes me crazy as when I'm having trouble with my sewing machine--I really sympathize with you!!! It would really tick me off, too, if I bought a machine thinking certain features were a sure thing and then being told they didn't work. Judy in Torrance
- IP
-
I've been wondering about my bobbin winder too. Every machine I ever used stopped winding when it is full but my Viking just seems to go on and on. At first I didn't pay attention and had to unwind a bunch because it wouldn't fit in the machine. Is this how they all are or just my problem?
KarenLyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
Originally posted by vmckennaI have a Viking and I wind bobbins through the needle. Just make sure that you have a metal presser foot on and the thread goes under the foot. I also slow the speed down - it works great. As for the bobbin not stopping - you can turn the bobbin level knob (at least that's what I call it) to adjust the fullness of the bobbin. I don't remember which direction so you will need to experiment with this.Lyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
Originally posted by vmckennaI have a Viking and I wind bobbins through the needle. Just make sure that you have a metal presser foot on and the thread goes under the foot. I also slow the speed down - it works great. As for the bobbin not stopping - you can turn the bobbin level knob (at least that's what I call it) to adjust the fullness of the bobbin. I don't remember which direction so you will need to experiment with this.
I have the Platinum 770 and the bobbin level knob is a white thing right next to the bobbin winder on the top. Its basically a sensor that stops the winding once the thread has hit it, so turning it to the right (toward the bobbin) reduces the fullness. I found that this was one of my problems. I reduced the fullness and I think thats helping.Lyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
I have a Viking Sapphire 830 & here's what I do. I pop up the extra spool holder. I take my top thread spool off & just set it in the bed of the machine, without unthreading the machine. I then put a spool on the extra spool holder, & thread it through that top piece & over to the bobbin. Then I wind it that way. My thread that is threaded through the machine doesn't get tangled. Now, I do watch that the bobbin winds evenly, I noticed it may not otherwise, which, I thought was weird too. I also stop it when it's full enough. Can't even remember if it stops on it's own, or not. Only have had mine a little over a year, but I get tired of unthreading a machine, to thread a bobbin, &, I don't like threading it through the needle, so this works for me. You do need more than one spool of the thread you are using, with doing it this way, but I usually have that. I also do this on the Janome I have & it works on it too... No extra spool holder on it, but I just set the one spool in the bed too, & put the other spool on to load the bobbin. It helps to load several bobbins at a time too. Try this & see if it works for you!...Lyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
Originally posted by kimberI took my machine in for servicing this past week since the bobbin winder was 1) no longer winding evenly and 2) was winding too full. I also had a problem when a bobbin was too full, I had to sew with the bobbin cover off so I wouldn't get rats nest.
I found out that there is no adjustment for the bobbin winding evenly - I just have to watch it and move the thread up and down with my finger as it winds.
I also found out how to adjust the full-ness of the bobbin.
My big issue was with the 'too full' bobbin. Apparently the plastic bobbins used by Viking warp when the bobbin is filled too tightly or too full. Who knew!
I was told that when I wind my bobbin, I need to 1) use the footpedal on the lowest speed rather than the start/stop switch and 2) not wind the bobbin using the thread through the needle since that mucks up with the bobbin tension. This last bit really ticked me off. This is one of the bonuses I liked when I was looking at purchasing the machine... its DESIGNED to be wound that way... and now they're telling me I shouldn't *use* it that way?!?!
Frustrating!!
I'm selling my BabyLock Quest. If anyone's interested, email me privately. No problems, we just haven't bonded. I love Vikings and I should have stuck with them.
from the beautiful Hudson Valley of NY
Gammill Classic Plus w/IQ
- IP
Comment
-
I have had Vikings since the late '90s. I wind both ways. When winding, I use the foot pedal(but if I used the Start button, I would reduce the speed to 1). The important part is that the thread goes thru the metal guide that keeps the thread winding evenly as well as the tensioner. When I have a problem with a particular wound bobbin, I rewind it onto an empty bobbin.
Never ever wind onto a partially filled bobbin.
Yes, you can turn the fill sensor to the right if it overfills. My old Viking had to have a special screw driver. My Viking tech is the greatest. That's why I'm a Viking girl. Service, service, service.
Coast of South Carolina USA
Sewing/Quilting on my Viking Sapphire 870
- IP
Comment
-
I wind mine, like the third photo in your diagram shows. Really don't like doing it the other way, seems old, & out of kelter to me, as no other machine I have ever had, said to do it that way. I don't have a problem winding bobbins on my 830 either, so not sure what the real problem is. I also pay attention when I am winding bobbins, so I know what is going on & when it's full. I really like my machine & have no complaints about it. It is a bit nosier than my Janome, but that's okay with me too. I use mine now, mainly on my quilt frame & love it! Still perfecting the tension a tad, but that will come with practice too, I'm sure...
Coast of South Carolina USA
Sewing/Quilting on my Viking Sapphire 870
- IP
Comment
What's Going On
Collapse
There are currently 395 users online. 0 members and 395 guests.
Most users ever online was 446 at 12:44 PM on 12-25-2024.
Forum Stats
Collapse
Topics: 7,646
Posts: 144,737
Members: 16,641
Active Members: 5
Welcome to our newest member, Lev Anderson-LevTest1.
Latest Topics
Collapse
There are no results that meet this criteria.
Trending
Collapse
There are no results that meet this criteria.
Comment