Announcement

Collapse
No announcement yet.
[vb_side_1]

Latest Forum Posts

Collapse

Trending Forum Posts

Collapse

[vb_side_2]
[vb_main_1]

Recommendations on Curved Safety Pins

Collapse
X
 
  • Time
  • Show
Clear All
new posts

    Recommendations on Curved Safety Pins

    When I first got into quilting I purchased a lot of very cheap curved safety pins and they have given me a lot of grief. Dull or not sharp at all and varied in quality. Time to replace.

    What brand would you recommend?

    #2
    I have a mountain of those curved safety pins but I don't use them because they are too hard to close and open. I find the EZ Basting Brights much lighter, easier to open and close, easier to see on most quilts. But mostly I spray baste or stitch baste these days. Have you ever tried one of those pumice strawberries to sharpen your pins? Harriet Hargrave recommended one at a workshop I attended. You can get one hanging off the side of those cheap tomato pin cushions. That's my tuppence worth.

    Comment


      #3
      I do have a strawberry. It's worth a shot.
      Thanks!

      Comment


        #4
        I use the curved safety pins, two sizes. I highly recommend the Pin Grip Covers and a Kwik Klip tool to open and close the pins (some people say a spoon works as well). The covers definitely help save my fingers from getting sore and makes them easier to see - especially when they fall on the floor.

        Comment


          #5
          I've used curved safety pins for my large quilts, unfortunately I have no idea of the brand. 1 do not close them as you place them in in case you need to move them and 2 using a spoon really helps when it comes to having to close them.

          Great new picture

          Comment


            #6
            Thank you all very much for your help. Gave me lots to think about. I also ordered a few Clover Flower pins too.

            Comment


              #7
              I use a crochet hook to close the pins. Works great. Must check out those covers.

              Comment


                #8
                I have the curved safety pins and Kwik Klip too, but about 10 years ago I started using Microtach to baste my quilts, for everything from small to queen-sized quilts. I saw it advertised in a magazine and researched it on the internet. I found one quilt shop in North Carolina that sold it.. I called them and asked if it could be used for quilting. They said 'Yes, they use it for quilting all the time,' so I ordered it and tried it out and have been using it ever since. It has a fine needle and fine nylon fasteners. I buy refills at ACMoore in their sewing section. (This is not the big basting gun sold at JoAnn's that has big plastic fasteners that leave big holes in the quilt. )
                I slide a plastic grid underneath the quilt as I baste.
                This method is much easier for me to use than safety pins. It makes a large quilt much lighter to handle than a quilt weighed down with safety pins. One big advantage to me is that I don't have to remove or maneuver around safety pins as I machine quilt - especially with free motion quilting. I try not to sew over the little nylon thingys, as that can make it a little trickier to remove them later, but it is no big deal if I do sew over them. In over 10 years of using them, I only broke one needle. Not sure why I broke that needle. Can't necessarily blame it on the little nylon fastener.

                Comment


                  #9
                  Judith, microtach sounds great. I will google and see if I can learn more. Janet

                  Comment


                    #10
                    I'm going to look into it, too. Years ago I had the one from JA's and found it to be terrible! Thanks for the info.

                    Betty D

                    Comment


                      #11
                      Thanks Judith!
                      Is Microtach affiliated with Avery?
                      Barb

                      Comment


                        #12
                        This one looked real interesting too. It's even got shorter plastic bits to keep fabric from sliding and moving.

                        http://www.quiltak.com

                        Comment


                          #13
                          Yes, Barb. Avery-Dennison makes the Microtach.

                          Comment


                            #14
                            Thank you Clara. The shorter, finer tacs of the Quiltac sound good to me.
                            I just read some reviews of the Quiltac. Most seem to love it. It appears the ones who don't like it had problems due to how they were using it. I would not lay the quilt on a hard surface and point the basting gun straight down - you could break the needle. Some reviewers who like theirs said they point the basting gun at a slant. I have been using a plastic grid under my quilts with my Microtach. . It lifts the quilt up a little. I aim the tacs in the open spaces of the grid. One reviewer who loves hers said she got a plastic ceiling grid from Home Depot.
                            I do Not recommend the Dritz or Collins basting guns; they leave big holes.

                            Comment

                            What's Going On

                            Collapse

                            There are currently 378 users online. 0 members and 378 guests.

                            Most users ever online was 446 at 12:44 PM on 12-25-2024.

                            Forum Stats

                            Collapse

                            Topics: 7,646   Posts: 144,737   Members: 16,641   Active Members: 5
                            Welcome to our newest member, Lev Anderson-LevTest1.

                            Latest Topics

                            Collapse

                            There are no results that meet this criteria.

                            Trending

                            Collapse

                            There are no results that meet this criteria.

                            Working...
                            X