Announcement
Collapse
No announcement yet.
[vb_side_1]
Latest Forum Posts
Collapse
-
by gjordanI’m trying to learn how to load photos. ...
-
Channel: BOM 2021 - Color My World
03-25-2021, 09:17 PM -
-
I am late to the party so I have only completed the 8 Small House 1 units so far. I realize this post is too late for everyone...
-
Channel: BOM 2021 - Color My World
03-24-2021, 11:30 AM -
-
by HelenWMost Color My World quilters probably think of you as the trouble shooter for all thing Color My World.
They may not...-
Channel: BOM 2021 - Color My World
03-23-2021, 06:47 AM -
-
I moved the first of the year but I had ordered the fabric kit. Now when I opened it i didnt find any directions or the...
-
Channel: BOM 2021 - Color My World
03-22-2021, 12:38 PM -
-
by midnight33I’m jumping ahead a bit....made brown fusible bias for tree trunks & now experimenting with dif shapes & fabrics...1 Photo
-
Channel: BOM 2021 - Color My World
03-21-2021, 05:37 PM -
-
by nhbasketsThought I’d start a thread where those of us using wool can post on progress when using this alternative medium for this...2 Photos
-
Channel: BOM 2021 - Color My World
03-19-2021, 04:31 PM -
-
Because I am using a dark background I plan to make lighter coloured trees. I know that the 14 yards of bias tape required...
-
Channel: BOM 2021 - Color My World
03-17-2021, 07:39 PM -
-
I can't find anything that mentions about what kind/size needle that is recommended if sewing with 60 wt thread on top and...
-
Channel: BOM 2021 - Color My World
03-14-2021, 08:04 PM -
Trending Forum Posts
Collapse
-
by gjordanI’m trying to learn how to load photos. ...
-
Channel: BOM 2021 - Color My World
03-25-2021, 09:17 PM -
-
I am late to the party so I have only completed the 8 Small House 1 units so far. I realize this post is too late for everyone...
-
Channel: BOM 2021 - Color My World
03-24-2021, 11:30 AM -
-
by HelenWMost Color My World quilters probably think of you as the trouble shooter for all thing Color My World.
They may not...-
Channel: BOM 2021 - Color My World
03-23-2021, 06:47 AM -
-
I moved the first of the year but I had ordered the fabric kit. Now when I opened it i didnt find any directions or the...
-
Channel: BOM 2021 - Color My World
03-22-2021, 12:38 PM -
-
by midnight33I’m jumping ahead a bit....made brown fusible bias for tree trunks & now experimenting with dif shapes & fabrics...1 Photo
-
Channel: BOM 2021 - Color My World
03-21-2021, 05:37 PM -
-
by nhbasketsThought I’d start a thread where those of us using wool can post on progress when using this alternative medium for this...2 Photos
-
Channel: BOM 2021 - Color My World
03-19-2021, 04:31 PM -
-
Because I am using a dark background I plan to make lighter coloured trees. I know that the 14 yards of bias tape required...
-
Channel: BOM 2021 - Color My World
03-17-2021, 07:39 PM -
-
I can't find anything that mentions about what kind/size needle that is recommended if sewing with 60 wt thread on top and...
-
Channel: BOM 2021 - Color My World
03-14-2021, 08:04 PM -
[vb_side_2]
[vb_main_1]
Sewing 60 Degree triangles so hexagon lays flat
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Sewing 60 Degree triangles so hexagon lays flat
Hello,
:?: I'm making some One Block Wonder quilts, and I have a question on getting all my triangles sewn together. Some times, when I have 3 of the triangles sewn, the resulting line will be straight, other times it won't. If I were to sew the hexagon completely at this point, with the ones that aren't straight, would puff in the middle.
I've been EXTREMELY careful to maintain a 1/4 inch seam allowance, and using a pressing board to line up the edges of my fabric as I press open my seams. Is there a trick I'm missing to get that final seam to be straight? Could it be my cutting of the triangles was a bit "off"?? I'm trying to figure out what is happening so that they will be flat, and just can't see it. I think the quilts will be okay after I get all my rows together, and the quilt quilted, but I don't want to have to fight my fabric to get it to lay flat while I'm making it.
I will be making 5 of these quilts for my family for Christmas (for NEXT YEAR, no way I would get that many done this year), and would like to know what I can do to get the half hexagons to be flat when I have them done.
Thanks for any and all help,
DianeTags: None
- IP
-
Couple of things I can think of with all of those seams coming together:
1) when stitching to the point stitch only to where the seams meet, not all the way through
2) press the seams open
3) stitch three pieces together to form half of the unit, stitch the next three pieces together to form the second half of the unit then stitch those units together, pushing the other seams out of the way (it's a bit of a pain but it can be done) and only stitch to that center point (take a back stitch each time just to lock the seam)
4) when pressing make sure to press, not iron, ironing will pull the bias out of whack
5) use pins, particularly where the centers are all going to meet.
6) stitch slowly, when approaching where the points meet, this always helps me.
Let me know if you need more help.
TeriTeri
Quilting is a Beautiful & Complicated Art!
- IP
Comment
-
Hi Chelley,
I actually have fabric to make at least 6 more of these quilts, which is why I wanted to figure out how to get all my hexagons to be flat before I start on the next one for cutting. (If that is the problem, I don't want to make the same mistake cutting as I did on my first one.)
I don't know if I lined up my ruler just a bit off, so that one side isn't as long as the others, or if it slipped a bit when cutting. I am using a long ruler and the 60 degree line, rather than a 60 degree triangle ruler. I have been looking at different rulers and contemplating buying one for these quilts, if that would help. I was leaning towards the Creative Grids, with the grips, or just putting grips on my ruler. Perhaps that will help in keeping my ruler from moving when I do make my cuts.
Good luck with your quilt, I love to see all the different blocks as I sew them together. It just amazes me how different they all are.
Diane
- IP
Comment
-
Teri,
I am pressing the seams open.
I am only sewing 3 of the triangles together, and not completing the block. According the to book, when you get your hexagons laid out, you sew half hexs in a row, and then sew the rows together, which create the finished hexs. ( you don't know where each hex will be in the finished quilt until you have them all laid out on your design wall and move things around to please). That way, you don't have any Y seams to sew. I can tell when I press though that IF I were to complete my hexs, they wouldn't be flat as they don't line up on the grid on my pressing board.
I am using a pressing board to line up my edges, just to make sure I don't pull on my bias, but they still seem to come out uneven. Which is why I'm thinking my cutting may be off just enough to keep them from being TRUE equalateral triangles.
Diane
- IP
Comment
-
dianne..... your concern about the ruler slipping may be your problem...try putting a strip of blue painter's tape on the measure line(s). this will allow you to nudge the ruler against the edge of your fabric correctly everytime. ..and might help prevent slipping.
also try a new sharp rotary blade. so you don't have to exert too much pressure, which can cause slipping. and consider how many layers you are trying to cut at one time.
it sounds like you are pressing carefully, teri mentioned sewing slowly, also make sure you guide the pieces under the needle with a light touch so you're not causing any stretching there.
good luck
- IP
Comment
-
Diane,
Because of the angle being used here you're going to need to off-set the rows so that the hexagons line up and your center points match. This should work. Line up your hexagons and everything else should fall into place.
I'm guessing from the cover of the book that later on you're going to go back and square off the quilt once you have all of the rows stitched together. Unless of course you're adding fabric triangles to each end as a border or outline as you're going along.
Try that and get back to me.
TeriTeri
Quilting is a Beautiful & Complicated Art!
- IP
Comment
-
Teri,
That is correct, the hexes will be lined up so they are staggered across the quilt. On two of the edges, I can either use half hexes to fill in the space, or take half away, to get the straight edge. On the other sides, I can either trim the hexes to get the straight edge, or fill in with extra fabric, or even border fabric. That is what is so cool about this design, the possibilities are endless.
Making kaleidoscopes from the layers fabric, each set of triangles is different from the others, and you never know what you are going to get until you sew them together. Also with this, the straight of grain is on the outside of all the blocks, so the bias edges are the ones sewn together.
I have been very careful in sewing, not to push my fabric under the needle, and I have a Pfaff using the IDT, so that it feeds the fabric evenly. This is why I think it may be in my cutting and not my sewing.
I will be trying some of the suggestions here to keep my ruler from slipping, and I have put a new blade in my rotary cutter, so that I'm not shifting my fabric. (Plus I have it pinned well, so that my layers don't shift while cutting so my kaleidoscopes turn out well).
Thanks for the help.
Diane
- IP
Comment
-
Hi, Diane. I agree, it might be the cutting. I have the creative grids 60 degree triangle ruler and my blocks have all gone together just fine.
Have you noticed any duplicates in your kaleidoscopes? I am not really happy with the fabric that I chose. It has a subtle stripe in the background and it messes with the design. It's just a technique learning quilt for me, though, so this one doesn't really matter. I have noticed that I'm getting quite a few duplicates even with a large repeat. I am going to have to try taking them apart and rotating the angles to see if that helps.
Or, heck ... I might just mix 'em all in and not worry about it!
Good luck!
Chelley
- IP
Comment
-
Chelly,
Thanks for letting me know that you haven't had any trouble with the Creative Grid ruler. I may wait to cut any more fabric until I get that. A friend of mine suggested using the Mercury Template Ruler. That looks like it would work for many different shapes, not just the 60 degree. One could spend a fortune on notions, and still not have them all.
I have noticed a few of my blocks being "similar", but I think they are off just enough that when I lay them out, they will either blend nicely, or I may not use some of them at all in my quilt. The first fabric I bought for this technique, it was an all over design, and the design wasn't large enough and the colors were so similar, that all the blocks looked the same from a distance, and unless you got close and inspected the blocks, you wouldn't know they were all different. Those blocks will probably end up being potholders rather than a quilt. (I picked some inexpensive fabric from JoAnns, with a 6 inch repeat, and only got enough for 6 repeats, so only got 19 stacks out of it).
I did notice when I was cutting my fabric, I had a little "play" room, so I could move the ruler up to 1 inch to get my cuts in a little different spot, and still get the most stacks out of the strip. I also turned some of my strips around and cut from the other end, so that they would start in a different place on the design. You could also start cutting with the angle on the ruler going the opposite way, instead of the fat end being close to you on the first cut, rotate it so it's on the top on some of the strips. If you didn't need all the stacks from a strip, you could always trim off a bit of the fabric to move the point of your hex to someplace else in the fabric. That should help get some varaition in your hexes.
Diane
- IP
Comment
-
Thanks, those are good ideas! I already have another piece of fabric picked out and I'll try to work in some variation when I cut it. I can't wait to see your pictures!
Edited to add this link: http://thequiltasylum.blogspot.com/
I just found this blog. There are some good examples there of OBW's made of different types of fabrics. I LOVE the Amy Butler one!
Chelley
- IP
Comment
-
When all else fails, you could create templates and mark your seam lines. Check out Sally Collins' "Mastering Machine Piecing" for some really good tips. I've started marking seams and corners for some Lone Star variations I've been playing with, an it has really made a difference. For me, it is faster to mark than to rip and re-sew.
- IP
Comment
What's Going On
Collapse
There are currently 410 users online. 0 members and 410 guests.
Most users ever online was 446 at 12:44 PM on 12-25-2024.
Forum Stats
Collapse
Topics: 7,646
Posts: 144,737
Members: 16,641
Active Members: 5
Welcome to our newest member, Lev Anderson-LevTest1.
Latest Topics
Collapse
There are no results that meet this criteria.
Trending
Collapse
There are no results that meet this criteria.
Comment