Sawtooth Block

[Margo]

My photo is now posted. Although I finished late yesterday, I didn't photograph my February entry until this morning--to get better lighting.

Another advantage of the technique that I used for the sawtooth blocks is that it lends itself very well to chain piecing which helps save even more time. I really liked making these blocks and didn't want to stop at just eight.

I started experiencing problems with the tension on my sewing machine while using the smaller stitch length. So, the tension on some of the seams on my sawtooth blocks are a little loose. I avoided sewing over pins, so I don't think that caused the problem. More likely, it's a problem with my bobbin. Lately, my bobbin winder has been somewhat tempermental.

[Quiltlovr1]

Thanks for the link, Nancy. I tried out this method last night and using the 3 1/4" and 1 7/8" squares with my needle moved over, they came out great but did need to be trimmed a little. I'm going to make more today and not do as scant of a 1/4" seam as last night. I cut a lot of background squares so now all I have to do is cut the main fabric and I can chain away.

Thanks again for the suggestion.

Sandy in Phoenix

[Quiltlovr1]

I have to admit I wanted to know I had enough background fabric for all the saw tooth stars so have made a start on all 72 blocks!! It's given me a head start on March. Pinwheels next.

[kathyst2]

Well, in the meantime, look what I found! http://www.patchpieces.com/FlyingGeese.pdf It's an easy technique that avoids both the center seam and the waste.

Hi Nancy, I have been trying to make good flying geese also, wanting to lose that center seam. I tried the above method, and also the method of sewing squares on the rectangle cut the size of the flying goose unit. My problem is that even when I mark the line, I curve the sewing line and the units bow out toward the background fabric.

This even happens when I sew half square triangles.

So I went to what I call the Eleanor Burns method, using a 3-1/2 inch square of background fabric and a 5 inch square of points fabric. It's in all her books, and when I googled it lots of links came up. Here's the first one:

http://stitchesandditches.blogspot.c...ese.html<br />
I made a sample, and I marked the seam lines carefully, making sure that they were square to each other, and pressed carefully. Used the square-in-a square ruler to trim off the excess on the long side where the points come together in the center. since that ruler has very fine lines. Then trimmed the rest of the unit. They look good, with no bowing!! Yeah!! I'll try the next batch of sawtooth stars with geese made this way.

Gee, by the time we're all done with this quilt our sewing skills will be awesome!

Kathy

[Judymc]

I learned to make my flying geese star points in a Sally Collins class. It's the technique using the rectangle and two squares. They turn out perfect every time. I sew just to the right of the drawn line. The stitching doesn't have to be perfect. Sometimes my stitching ends up a little MORE to the right of the line and not necessarily straight! Just press the piece after stitching to "set" the stitches. There will be three layers of "triangles" and you will trim the middle one leaving a 1/4" seam allowance. Then press the top triangle back matching it evenly with the back triangle. The stitching line doesn't matter--just match the front and back triangles. I leave the back triangle in the block so it will always be accurate. I don't know if this is Ritzy's method--I had trouble trying to find her tutorial. Everyone has to find a method that works for them, but I hope this helps somebody on the Forum. Judy in Torrance

[Cre8tvlwyr]

Thank you Nancy! This is wonderful - I've sometimes been tempted to make flying geese the traditional way simply because I hated to waste fabric, but this is the best of both worlds - speed and not wasteful.Thanks for sharing :P