Announcement

Collapse
No announcement yet.
[vb_side_1]

Latest Forum Posts

Collapse

Trending Forum Posts

Collapse

[vb_side_2]
[vb_main_1]

the letter "e"

Collapse
X
 
  • Time
  • Show
Clear All
new posts

    the letter "e"

    I have finished the letter "J" without any problem, but I cannot say the same for the letter "e". If I make the lime green block 3" X 3", it does not fit flying geese measuring 1 1/2" X 2 1/2". The video showed using the flying geese bloc loc, but the size for 1 1/2" is 3". I tried adjusting the geese and the squares to fit the 3" lime block, but got stuck again with the next flying geese that are not large enough. Are their corrections to the measurements?????

    #2
    I see in step 3 to "Trim the appliquéd square to 2-1/2 x 2-1/2. It would then fit the 2-1/2 Flying geese.

    Hope that helps...

    Andrée

    Comment


      #3
      I trimmed my flying geese to fit the "E" block, but the next set of flying geese don't fit...totally something wrong with the measurements.

      Comment


        #4
        I ended up trimming 1/4" on the inner flying geese, then added the outer pieces. Block ended up 8 1/2".

        Comment


          #5
          Per Janet's instructions:

          STEP 1 - For the small flying geese units, Trim the flying geese units to measure 1 ½” x 2 ½”.
          For the large flying geese units: Trim these units to measure 2 ½” x 4 ½”.

          STEP 3 – For the center square: trim the appliqued square to 2 ½” x 2 ½”.

          These pieces all fit together perfectly! The block now measures 8-1/2" x 8-1/2" and will finish at 8" square.


          It's Not What You Gather, But What You Scatter
          That Tells What Kind Of Life You Have Lived !

          Comment


            #6
            Really having problems with letter e. Is there a way to let us know that a mistake has been made in the
            Cutting directions so we all know about it? After reading the notes I'm still not sure what measurement is wrong.

            Janett

            Comment


              #7
              It's the centre square that the 'e' sits on. The instructions say to cut a 3" square but you need to trim it down to 2 1/2" before assembling the block.

              Comment


                #8
                And it says so in step 3...

                Andrée

                Comment

                What's Going On

                Collapse

                There are currently 438 users online. 0 members and 438 guests.

                Most users ever online was 442 at 07:43 AM on 11-15-2024.

                Forum Stats

                Collapse

                Topics: 7,646   Posts: 144,737   Members: 16,641   Active Members: 5
                Welcome to our newest member, Lev Anderson-LevTest1.

                Latest Topics

                Collapse

                There are no results that meet this criteria.

                Trending

                Collapse

                There are no results that meet this criteria.

                Working...
                X