Announcement

Collapse
No announcement yet.
[vb_side_1]

Latest Forum Posts

Collapse

Trending Forum Posts

Collapse

[vb_side_2]
[vb_main_1]

Bias edge

Collapse
X
 
  • Time
  • Show
Clear All
new posts

    Bias edge

    Help, I am working with a biased edge to put a strip on, it is puckering , I have sewn a thread down the edge, it is still not right

    #2
    Can you take in the bias any? As an extreme measure, I would pin it to death, alternating pins on top and back to take up as much slack as poss. The stitching on the edge may have even stretched it out more, I'm afraid to say. Maybe take that out - carefully. Put in a zillion pins and let them do the work. Sew slowly over the pins. We've all been there!

    Comment


      #3
      Starch the fabric until it can stand up on it's own.
      From the edge of Sherwood Forest, home of Robin Hood

      Comment


        #4
        I agree with Lorchen, starch is the thing that will do it. And then sew with the bias on the bottom and the strip on the top.

        Comment


          #5
          Originally posted by Lorchen
          Starch the fabric until it can stand up on it's own.
          Are you saying as you starch and press the stretched bias will shrink? Or are you suggesting you starch and press prior to having cut the fabric on the bias in the first place?

          Comment


            #6
            Starch before you cut - if possible.
            From the edge of Sherwood Forest, home of Robin Hood

            Comment


              #7
              Yes, starching is nice beforehand, but the question was what to do if it is already stretched.

              Comment


                #8
                I'm not sure you can put the geniei back in the bottle.......

                Comment


                  #9
                  It is possible to ease the length back to where it should be.

                  Take your length of tape & mark the intended length on it with pins, also put a pin in the 1/2 way mark, 1/4 & 1/8. On the bias piece pin mark the 1/2, 1/4, 1/8. Match up the pins starting with the 2 ends then the centre. Once you have got the 1/8 sections pinned, continue finding the centre between 2 pins of both layers and pin them together. You will need to do this until your pins are about 1/8" apart (maybe 1/16" apart depending on the amount to be eased). At this point you could lay it on a flat surface, dampen it (with spray starch) and pat it back to flat (or iron it) or you could stitch on the tape, & remove the pins before you dampen & flatten it.

                  The technique (minus the starch) is used in couture dressmaking to tighten up necklines & armholes, & I have used it to great effect in this way, But there is no reason that it won't work for you - you just need 'millions' of pins and a bit of time & concentration.

                  Comment


                    #10
                    Gingene, you might find this Sharon Shambers video useful. In it she shrinks a block. Might help.

                    http://www.youtube.com/watch?v=i6apl...amp;lf=mh_lolz

                    Comment

                    What's Going On

                    Collapse

                    There are currently 364 users online. 0 members and 364 guests.

                    Most users ever online was 437 at 02:59 AM on 11-15-2024.

                    Forum Stats

                    Collapse

                    Topics: 7,646   Posts: 144,737   Members: 16,641   Active Members: 5
                    Welcome to our newest member, Lev Anderson-LevTest1.

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    Trending

                    Collapse

                    There are no results that meet this criteria.

                    Working...
                    X